We have stumbled on this article about How to Troubleshoot and Repair an Electric Water Heater directly below on the web and accepted it made perfect sense to write about it with you on this page.
Several modern-day residences use an electric water heater for their heater, because of its benefit and convenience of use. Nonetheless, much like any other electrical appliances, troubles might develop with its usage, unexpectedly. It can be actually irritating to get up to a chilly shower instead of a warm one or having your bathroom with water that isn't hot enough or perhaps as well hot. Whatever the case might be, hot water heater troubles can be rather stressful. Thankfully, we've made a listing of possible solutions to your hot water heater concerns. There are a variety of elements that could create most of these troubles, maybe a problem with the power supply, the electrical heating element, or the thermostat. Prior to doing anything, ensure you turn off the main power supply for safety and security. Whatever the issue is, getting it repaired should not pose way too much of a problem if you comply with these steps:
Call A Specialist:
If after replacing all faulty components as well as resetting your temperature, the hot water heater still isn't functioning, you may require to call a professional plumber for a specialist viewpoint. The problem with your heating system could be that the cold and hot taps have actually been changed or it may be undersized for the quantity of hot water required in your home. Whatever the instance may be, a professional plumber would certainly help resolve the problem.
Inspect Your Power Supply:
As standard as this may appear, it is really required. Without appropriate power, your hot water heater will not operate. So the first thing to do when your water all of a sudden retires is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, just transform it on and off again. Change any kind of broken or worn-out fuse. Check the device with power after these modifications to see if it's now working.
Inspect Your Thermostat:
If your hot water heater still isn't functioning or the water coming out isn't hot enough, you might require to examine the temperature level settings on your top thermostat. Make certain the breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset above the thermostat. This ought to assist heat up the water. Transform the breaker back on and also examine if the trouble has actually been resolved.
Check the Burner in the Hot Water Heater:
If it's not a power trouble, after that attempt checking out your heating element if it is still functioning. Test each of your heating elements to be sure the issue isn't with any of them. If any of them is defective, replace that part and then check whether the hot water is back on.
Conclusion
Water heater problems are not always major. Many of them are due to minor concerns like a blown fuse or damaged burner. Changing the malfunctioning parts must work. Nevertheless, if you are still not able to solve the problem, give a call to your nearest plumber ahead to get it dealt with.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
We are very drawn to How to Troubleshoot and Repair an Electric Water Heater and I'm hoping you appreciated the piece. Liked our blog? Please share it. Help another person find it. Thanks for your time. Visit again soon.
Schedule A Free Estimate